Tama Speed Cobra HH915D Hi-Hat Stand

Main Features

• Quick-Set Hi-Hat Clutch
• Spring Seat
• 6-way Tension Adjustment
• Bigger Rubber Feet w/Duo-Spike
• Long Footboard
• Tilt System
• Spare-The-Rods Tension Rod Protector

The HH915D features the same long footboard as our Speed Cobra Bass Drum Pedal. Its core design is based on the Iron Cobra Hi-Hat Stand, widely recognised as one of the best performing hi-hat stands in the world.


The longer footboard offers footwork flexibility, added control and sensitivity. The latest innovation on this stand, the new Quick-Set Clutch, allows hi-hat cymbals to be quickly attached and removed. The Hinge Guard Block on the footboard holds the bearing more evenly, minimising stress and maximising smoothness.

Quick-Set Hi-Hat Clutch
With just one touch, the Quick-Set Clutch can be attached or removed - simply push the button on the side of the clutch. The clutch also allows the top hi-hat cymbal to float more freely, maximising the natural resonance of the cymbals.

Spring Seat
By tilting the bottom hi-hat cymbal, you can get a crisper and clearer hi-hat sound with your foot.

6-Way Tension Adjustment
Six different levels of tension can be achieved quickly by using the six easily visible settings.

Footboard Angle Adjustment
Like Speed Cobra pedals, footboard angles on Speed Cobra hi-hats can be adjusted. You can perfectly match the angle between the hi-hat footboard and the slave-side footboard of your double pedal.

Oiles Bearing Hinge
Offering even less friction than standard ball bearing, Oiles bearings also eliminate side-to-side motion and provide superior durability.

Tilt System
Not only do Tilt equipped stands offer more flexible set-ups, they also offer more expressive hi-hat work because you can tilt the hi-hat cymbal. Speed Cobra hi-hat stands can be tilted quickly and easily by loosening just one T-Bolt.

Spare-The-Rods Tension Rod Protector
No more tension rods getting bent out of shape during transport! With Spare-The-Rod, you can save your tension rod the rigors of the road by packing it in the specially designed upper section pipe. It's a small, but very significant TAMA hardware innovation.
1.Insert the tension rod into the upper tube.
2.Hold the tension rod in place with the hi-hat clutch.
3.Done. The upper tube covers the tension rod.

Duo-spike
It's called a stand because it's not supposed to walk-and our Duo-Spike makes sure your Speed Cobra hi-hat stands in one place. You can easily switch from rubber to metal by using a standard drum key.

Dual Legs
Our two-leg design is not only easier to set up in limited spaces, it's actually more secure than the standard three-leg design. The secret is in the small stabiliser under the footboard which effectively shifts the balance and strength of the stand toward the player. Since there's no steel plate under the footboard, Speed Cobra hi-hats are foldable for quick set-up, fast tear down, and easy portability.

Non-Loosening Tension Rod
Specially shaped plastic and metal nuts fit together perfectly to keep the cymbal rod from loosening while playing.

Swivel Foot
Since the foot pedal can be rotated around the the dual leg base, the Swivel Foot feature greatly expands floor space and set-up flexibility.

Glide-Tite Grip Joint
Our new Glide-Tite Grip Joint allows for a more secure attachment by using a metal-to-metal contact point. This provides an extremely solid anchor and complete isolation for a tom or cymbal. Because the stand does not move with the instrument, the natural resonance of that instrument is maximised.

Hinge Guard Block
The construction of the Bearing Hinge on the footplate has changed from a one-piece assembly to two pieces. This design holds the bearing more evenly - minimising stress and maximising smoothness, while also adding to the pedal's sense of power.

Additional Short Rod Included
The new Iron Cobra hi-hat stands now come with both long and short cymbal rods, allowing drummers a choice based on their unique setup needs.