Strymon DIG V2 Delay Dual Digital Delay Effects Pedal

DIG unearths the true soul of digital delay and doubles it — two simultaneous, integrated delays with captivating rack delay voicings from the 1980s and today, for incredible expressive potential.

Effortlessly create your own world of intricate and synchronized echoes, along with hypnotic and atmospheric repeats that blur the line between delay and reverb. Stretch your sonic horizons with five musically satisfying rhythmic subdivisions and three dual delay routing options. Go from syncopated, pulsating delay patterns, to evocative, spaced-out echo trails, all in a compact, pedalboard-friendly format.

Main Features

• Hand crafted dTape algorithms deliver vintage recreation of analogue reel to reel tape effects
• FX include deliciously compressed/transparently overdriven tape saturation, plus doubletracking FX (syrupy slapback and longer (up to 500m/s) warm tape delays, gorgeous tape chorus, psychadelic tape flanging)
• The tape saturation and doubletracker circuits sections are independent- two pedals in one!
• Independent control of (i) tape saturation level and decks' output volume (ii) reel to reel lag time + reel varispeed (‘wobble’)
• Blend (of 2 tape decks) control and three Doubletracker blend types (Sum, Invert, Bounce) to individually tailor your effects
• Secondary controls allow control of High Trim, Low Trim, Auto-Flange Time, Wide Stereo Mode and +/- 3dB Boost/Cut
• Hold down the bypass switch for a studio-inspired through-zero auto-flange!
• Two signal routing modes: Standard and Wide Stereo
• Expression pedal input with selectable control over any knob parameter
• TRS stereo input (with stunning new JFET preamp) and output, plus MONO/STEREO input switch on the back of the unit
• Full MIDI control, MIDI clock sync and 300 presets
• USB port for updates and MIDI over USB
• TRS MIDI jacks: allow bi-directional MIDI communication with a single cable using the Conduit interface
• Editor/librarian support via USB

Rack To The Future
Rack-mount digital delays of the ’80s ushered in a new era of audio effects. The innovative electronic designs generated the cleanest delays that had yet been heard, but also created their own special and intriguing sonic characteristics. Thirty-plus years later, these sounds remain as distinctive and inspiring as ever.

Our thorough investigation of digital delay technology reveals the unique personalities that these delays possess. Delve into DIG’s three digital delay voicings: the early ’80s adaptive delta modulation mode, the mid-’80s 12 bit pulse code modulation mode, and the modern high-resolution 24/96 mode.

Multiply these distinct voicings by two and get DIG — your perfect dual delay ally.

New Features on V2
The second generation DIG keeps the same distinctive rack-mount digital delay tones from our original and adds significant new features, incorporating technological advancements, hardware improvements and design enhancements to give you additional flexibility, power, and ease of use on stage and in the studio.

MIDI
Full MIDI implementation means you can control just about every switch, knob, and setting remotely by sending MIDI commands from your controller or DAW via DIG’s EXP/MIDI jack or USB-C connection.

Delay time can be synchronized via MIDI Clock Sync, and the sync setting can be saved for each preset.

300 MIDI preset locations are available for loading and saving your favorite settings.

Hardware Improvements
A premium analog JFET input circuit ensures superb responsiveness to your playing, and you can select mono or stereo input with the flick of a rear panel switch.

All this, plus a new ARM DSP chip provides more processing power for every sonic nuance, with less energy consumption on your pedalboard.

Tone Knob
This powerful control sets the feedback filter response for tailoring the sound of your echoes. Fast and intuitive to use, it is actually two filters on one control: Turn left for high cut and right for low cut, or set at 12 o’clock for a flat response.