Sontronics Orpheus Large Diaphragm Condenser Microphone

Main Features

• Large-diaphragm condenser microphone
• Omni, cardioid and figure-of-8 patterns
• +10dB and -10dB function
• Comes in luxury wooden case

The Sontronics Orpheus offers professional studio quality in a unique and eye-catching body.


ORPHEUS - Multi-pattern condenser microphone

The ORPHEUS is a perfect marriage of form and function. The highly sensitive 1.07 inch dual-diaphragm capsule is suspended in its own special mount, almost floating in the large, spherical basket. The body is cast from Zinc alloy, which gives almost zero resonance and helps to keep the signal crystal-clear.

Omni, Cardioid and Figure 8 patterns, and a 10dB cut/boost function, make this microphone the perfect 'workhorse' in practically any studio or live sound application. Its low self-noise and unmistakable presence allows you to record the subtlest of instruments or voices without concern or the need to perform 'surgery' afterwards.

Supplied in a luxury wooden case, ORPHEUS is a combination of the past and the present, but more importantly it is unique. The XLR cable enters from the rear casing, allowing the cable to follow its natural route along the boom and therefore reduces strain on the cable, connector and socket. As the capsule is isolated in its own suspension, the ORPHEUS uses a direct mounting clamp, rather than the usual bulky shockmount, which all adds to the clean lines of this masterpiece.

In Greek mythology, Orpheus was a legendary singer and musician famous for his ability to enchant audiences with his songs - a rather apt name, we thought, for such a special microphone.

If you like your studio tools to look good as well as sound good, then the ORPHEUS is the answer.

Specifications

• Response: 20Hz - 20KHz
• Sensitivity: 20mV/Pa -32dB ±2dB (0dB = 1V/Pa 1,000Hz)
• Polar Pattern: Omni, Cardioid and Figure-of-8
• Impedance: <=200 Ohms
• Equivalent Noise Level: 16dB(A-weighted)
• Max SPL for 0.5% THD @ 1,000Hz: 125dB
• Power Source: Phantom power 48V±4V
• Connector: 3pin XLR