Markbass Little Mark Tube 800 Bass Amp Head

Main Features

• Lightweight and compact bass head
• 800W Rms @ 4 Ohms / 500W Rms @ 8 Ohms
• Solid state and valve preamps with a blend control
• Flexible four band EQ

The Markbass Little Mark Tube 800 offers blendable solid state and vale preamps opening a massive range of bass tones.

The Little Mark Tube solves the 'tube or solid state' dilemma. The Little Mark Tube 800 goes a step further by also addressing that other perennial concern, 'Will I have enough power?' The 800 watts from this powerful amp will satisfy any thirst for power, and the two blendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp… or a mix of both!


Markbass Little Mark Tube 800 Specifications

Inputs
Input 1: Impedance 500 Kohm, Max. Voltage 15 Vpp
Input 2: (Balanced XLR/1/4 inch Combo)
Balanced: Impedance 500 Kohm, Max. Voltage 15 Vpp, Phantom Power 48V
Effect Return: Impedance 33 Kohm, Max. Voltage 10 Vpp

Controls
Gain 1: -60 Db To +23 Db Range
Gain 2: -60 Db To +23 Db Range
Mix: Mixes Tube And Solid State Gain
Master Volume
Line Out Level
Ground Lift (Switch On Rear Panel)
Pre/Post Eq (Switch On Rear Panel)
Mute (Push/Pull On Master Knob)

Equalization
Low: Centre Frequency 40 Hz, Level: ±16 Db
Low Mid: Centre Frequency 360 Hz, Level: ±16 Db
High Mid: Centre Frequency 800 Hz, Level: ±16 Db
High: Centre Frequency 10 Khz, Level: ±16 Db
VPF (Variable Pre-Shape Filter) Centre Frequency 380 Hz
VLE (Vintage Loudspeaker Emulator) Frequency Range 250 Hz-20 Khz

Outputs
Line Out: Balanced XLR, Max. Voltage 20 Vpp
Effect Send: Unbalanced, Max. Voltage 20 Vpp (Pre-Eq)
Tuner Out: Unbalanced, Max. Voltage 2 Vpp
Speaker Out: Speakon/1/4 inch Combo, 1/4 inch

Other
Dimensions (W x D x H): 27.6 x 25 x 8.3 cm / 10.87 x 9.84 x 3.27 inches
Weight: 3 Kg / 6.61 Lbs
Output Power: 800W Rms @ 4 Ohms / 500W Rms @ 8 Ohms