Line 6 Catalyst CX 60 Guitar Amp Combo

Catalyst CX 60 is a 60-watt dual-channel 1x12 combo amplifier featuring 12 Amp Voicings derived from Helix. It performs like a traditional guitar amp—while providing the increased versatility of a modern amp.

12 Amp Voicings
Select one of 12 Amp Voicings ranging from pristine clean to modern high-gain, derived from the Helix amp and effects processor.

Traditional Controls Plus
Catalyst CX amps feature familiar Volume, Gain, Tone, and Reverb controls—with numerous effect and other options available just “under the hood.”

Dedicated Boost Each Amp Voicing is matched with an optimal Boost type. Use the Boost control to adjust the amount, and the Boost button to switch the circuit in and out.

Onboard Effects
Select up to two of 24 Reverb, Delay, Modulation, and Pitch effects derived from Helix.

Tempo/Tuner
Tap in the tempo when using time-based effects such as delay and tremolo. Press and momentarily hold the button to access the chromatic tuner.

Optional Footswitch
Connect an optional LFS2 footswitch to toggle between channels and turn effects on and off remotely. The roadworthy metal LFS2 comes with a cable.

Effects Loop
Insert external effects and other devices into your signal chain using the Effects Loop.

Power Amp In
Use Catalyst CX as a powered speaker by bypassing the preamp. Perfect for use with amp modellers and simulators.

Output Power
Provides half power, 0.5 watts, and speaker Mute options for reduced volume with minimal tone variation.

USB
Use this to connect to the Catalyst Edit app (Mac®, PC, iOS®, Android™) and to the onboard audio interface, which provides 4 channels (4in/4out) at 24-bit, 44.1kHz or 48kHz.

MIDI
Catalyst 100 and 200 receive Program Change (channel/preset selection) and Continuous Controller messages via 5-pin DIN. Catalyst 60 supports MIDI over USB-B.