JBL AM6315/95 1500 Watt Three Way Passive Installation PA Speakers (Pair) (ex-display)

Pair of 3-way passive PA speakers with 15 inch LF drivers.

These B-Stock speakers are in very good condition with some marks across the cabinets and some small dents on the grilles. Please note that they are quite heavy and will be delivered on a pallet.

Main Features

• 3-Way 15 inch passive PA speaker system
• 90 x 50 degree Coverage, rotatable for use in either vertical or horizontal orientation
• CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency
• PT™ Progressive Transition Waveguide for excellent pattern control with low distortion
• Bi-Amp/Tri-Amp Switchable

AM6315/95 is a high power 3-way full-range loudspeaker system comprised of one 380 mm (15 in) VGCTM Vented Gap Cooled low frequency driver, one 200 mm (8 in) CMCD Cone Midrange Compression Driver, and one 38 mm (1.5 in) exit/75 mm (3 in) voice-coil HF compression driver. The multi-band PT Progressive Transition mid-high frequency waveguide provides well-controlled 90 by 50 degree coverage and is rotatable for cabinet positioning in either horizontal or vertical orientation. High-slope crossovers minimise band overlap and well-controlled off-axis response enhances arrayability.

The cabinet is fitted with M10 threaded suspension points.

AM6315/95 is part of JBL’s AE Application Engineered Series, a versatile family of loudspeakers for a wide variety of fixed installation applications.

JBL AM6315/95 Specifications:

System

• Frequency Range1 (-10 dB): 38 Hz – 19 kHz
• Frequency Response1 (±3 dB): 45 Hz – 17 kHz
• Coverage Pattern: 90 x 50 degree, rotatable waveguide
• Directivity Factor (Q): 10
• Directivity Index (DI): 10 dB
• Crossover Modes: Tri-amp/Bi-amp switchable
• Passive Crossover Slopess2: MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz
• Transducer Power Rating (AES)3: LF: 1000 W (4000 W peak), 2 hrs
• 600 W (2400 W peak), 100 hrs
• MF: 350 W (1400 W peak), 100 hrs
• HF: 75 W (300 W peak), 2 hrs
• Long-Term System Power Rating (IEC)4: LF: 600 W (2400 W peak), 100 hrs
• MF/HF: 350 W (1400 W peak), 100 hrs
• Maximum SPL5: LF: 125 dB-SPL cont avg (131 dB peak)
• Tri-amp mode:
• MF: 133 dB-SPL cont avg (139 dB peak)
• HF: 132 dB-SPL cont avg (138 dB peak)
• Bi-amp mode:
• MF/HF: 132 dB-SPL cont avg (138 dB peak)
• System Sensitivity of Passive Sections6 (1W @ 1m): MF/HF Section in Bi-amp mode: 108 dB SPL

Transducers:

• Low Frequency Driver: 1 x JBL 2226H 380 mm (15 in ) VGC™ driver with 100 mm (4 in) voice coil
• Nominal Impedance: 8 ohms
• Sensitivity6 (1W @ 1m, within operational band): 95 dB SPL
• Midrange Driver: JBL CMCD-81H Cone Midrange Compression Driver with integral 200 mm
• (8 in) diameter Differential Drive® dual voice-coil internal driver
• Nominal Impedance: 8 ohms
• Sensitivity6 (1W @ 1m): 108 dB SPL
• High Frequency Driver: JBL 2431H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
• Nominal Impedance: 8 ohms
• Sensitivity6 (1W @ 1m): 113 dB SPL
• Waveguide: PT-K95MH

Physical:

• Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade
• 11-ply Finnish birch plywood
• Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
• Finish: Black DuraFlex™ finish.
• Grille: Powder coated 14 gauge perforated steel, with acoustically transparent
• black foam backing.
• Input Connector: NL8 Neutrik Speakon® and CE-compliant covered barrier strip terminals.
• Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width
• 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loopthrough.
• Dimensions (H x W x D in vertical cabinet orientation): 967 x 561 x 657 mm (38.1 x 22.1 x 25.9 in)
• Weight: 48.0 kg (106 lb)