Blackstar Dept. 10 Amped 2 Guitar Amp Pedal

AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor, capable of delivering the tone and feel of traditional valve amps. You can use it in the front end of a traditional amp, power a cabinet at 100 Watts or go direct, ensuring you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.

Main Features

• 100W 3 channel pedal power amp.
• Performance ready amp with multi effects.
• Unique high-headroom design that automatically matches to the speaker impedance to deliver maximum power and optimum tone with any 8 or 16 Ohm cabinet set-up.
• Response control delivers three distinctly different and authentic power valve responses - EL34, 6L6 and EL84. Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp.
• Choose from USA, UK and Classic Amp voicings to dial in your perfect tone
• 4 channel audio USB for easy recording.
• 3 drive voices – Boost, Drive and Fuzz.
• Effects include Modulation, Delay and Reverb.
• Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, TRS stereo line out and XLR Mono D.I. for live use.
• Effects loop, 2 x 9V DC outputs and MIDI control for easy integration into your pedalboard or rig.
• On board Chromatic Tuner allowing for tuning on the fly during live performances

High Headroom Power Amp Design The power amplifier’s unique, high-headroom design does not compromise on output even at 16 Ohms. Get maximum power and optimum tone with any cabinet set-up at 8 or 16 Ohms. Blackstar’s patented Response control offers distinctly different and authentic power valve responses and guitar amp dynamics.

Speaker Simulator and Direct Outputs Fine-tune your cabinet, mic, and room simulations with our CabRig technology and output via XLR or stereo jack. Alternatively, connect via USB for effortlessly simple recording to your DAW without the need for an interface.

Advanced Effects Processor Four studio quality, fully configurable, built-in effects pedals (Drive, Modulation, Delay and Reverb) provides unparalleled versatility.

Specifications

• Power: 100W
• Type: Digital with Class D Power Amp
• Voice: USA, UK, Classic
• EQ: Bass, Middle, Treble
• Power Reduction: 100W, 20W, 1W
• Response: EL84, EL34, 6L6
• Reverb: Time, Type (Room, Spring, Plate), Level (more settings via Architect)
• Reverb Freeze: Yes
• USB Audio: Yes (4 channel)
• XLR CABRIG Output: Yes
• Effects Loop: Yes (series or parallel selectable in Architect)
• MIDI Control: Yes
• Speaker Outputs: 8 Ohm, 16 Ohm
• 9V DC Outputs: 2 (maximum combined current 500mA)
• Voltage: 100V to 240V ~ 50/60Hz
• Weight: 1.96kg
• Dimensions: 288 x 80 x 149 (mm)