Description
Main Features
- Excels in venues with controlled stage volume or in-ear monitoring
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Superior anti-shock engineering for low handling noise
- Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
- Condenser design for studio-quality performance
- Integral 80 Hz HPF switch and 10 dB pad
- Corrosion-resistant contacts from gold-plated XLRM-type connector
The Audio Technica ATM710 is a cardioid condenser microphone with anti-shock engineering for low handling noise.
The new Artist Series vocal condenser microphone is tailored for exacting detail and high-fidelity vocal reproduction. With a condenser design for studio-quality performance, the ATM710 delivers remarkable clarity. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off position that reduces the microphone's sensitivity to popping in close vocal use. The ATM710 is also equipped with a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. The ATM710 features a rugged, all-metal design and construction for years of trouble-free use.
Specifications:
ELEMENT : Fixed-charge back plate permanently polarized condenser
POLAR PATTERN : Cardioid
FREQUENCY RESPONSE : 40-20,000 Hz
LOW FREQUENCY ROLL-OFF : 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY : –40 dB (10.0 mV) re 1V at 1 Pa
IMPEDANCE : 200 ohms
MAXIMUM INPUT SOUND LEVEL : 148 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (TYPICAL) : 127 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO : 73 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS : 11-52V DC, 3.5 mA typical
SWITCHES : Flat, roll-off 10 dB pad
WEIGHT : 274 g (9.7 oz)
DIMENSIONS : 179.0 mm (7.05 inch) long, 50.0 mm (1.97 inch) diameter
OUTPUT CONNECTOR : Integral 3-pin XLRM-type
ACCESSORIES FURNISHED : AT8470 Quiet-Flex(Trademark) stand clamp for 5/8 inch-27 threaded stands, 5/8 inch-27 to 3/8 inch-16 threaded adapter, soft protective pouch
AUDIO-TECHNICA CASE STYLE : T6
Delivery
This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning of delivery by email or text message.
Mainland UK: £3.50 within mainland UK ( Orders over £199 are delivered FREE )
UK Non-Mainland: from £12
Rep. of Ireland and Mainland Europe: from £30 (calculated at checkout).
Warranty Information
Audiotechnica Warranty Information: 2 Years
Please note this information is provided for guidance only as manufacturer warranties may be updated from time to time. For full please visit the manufacturer's website here.
3 years warranty for VIP members
